Possible for reuse of inert gas
Inert gas can be reused since volatile organic compound gases in the inert gas are recovered, and then inert gas purity becomes high.
This unit recovers volatile organic compound gas contained in inert gas, and then the inert gas with high purity will be re-used.
The same volatile organic compound gases in inert gas are recovered by this unit. However, newly developed adsorbents are loaded in adsorbers.
Typical Processable Gases
| Hydrocarbon series – Benzene – Toluene – Xylene |
Halogen series – Dichloromethane – Tetrachloroethylene – Chloroform |
Alcohols – Methanol – Ethanol – Butanol |
| Ketone – Acetone – Methyl Ethyl Ketone |
Ester – Ethyl Acetate |
Please contact us for another hydrocarbon gas for our review. Report will be issued whether the hydrocarbon gas can be processable or not.
Characteristics
High recovery rate
We cleared EPA of USA 35Ghc/M3. The recovery rate of hydrocarbon gas is more than 99%. Or, it is possible to reduce hydrocarbon gas concentration less than 1 vol% at the outlet of the unit.
Compact and low investment cost
Due to simple and skid-mounted unit, it is possible to install the unit at narrow site area with low initial cost investment.
Wet free –Dry operation
No effluent treatment facility for condensate water is required because no steam is used for Adsorbent’s regeneration.
Atmospheric pressure operation
High Pressure Gas Safety Law (Japan) is not applied for the equipment since adsorption process is executed under the vacuum pressure.
Process Flow
If you are interested in VOC countermeasures, please consult with SES, which has a wealth of experience.
- We want to reuse the solvent in the exhaust gas to eliminate waste!
- We want to change to VOC countermeasures that are safe and easy to operate!
- We want to know which method is best for treatment.
- We offer estimates and consultations!
Anytime Anywhere
we receive your inquiry.
Business hour：AM9:00〜PM18:00
Monday to Friday
